Smug Brit Posted December 2, 2015 Share Posted December 2, 2015 Mainboard Manufacturer: Gigabyte Model: F2A88X-D3H Version: AMI UEFI BIOS F6 Chipset Vendor: AMDChipset Model: K15 IMCChipset Revision: 00 CPU AMD A10-6800K Shows temps about 35 °C higher than other programs. Windows 7 x64 Bit Home Link to comment Share on other sites More sharing options...
Олег Posted December 5, 2015 Share Posted December 5, 2015 GPU Temperature is not displayed.( HP Pavilion 17 e 062sr) Операционная система Майкрософт Windows 8.1 для одного языка 64-bit Тип компьютера: Ноутбук Центральный процессор Intel Core i5 3230M @ 2.60GHz 41 °C Технология Ivy Bridge 22nm Оперативная память 6,00ГБ 2-канальная DDR3 @ 798 МГц (11-11-11-28) Системная плата Изготовитель Hewlett-Packard Модель 1972 (U3E1) Версия 95.33 Изготовитель сев. моста Intel Модель сев. моста Ivy Bridge Ревизия сев. моста 09 Изготовитель юж. моста Intel Модель юж. моста HM76 Ревизия юж. моста 04 Температура системы 40 °C BIOS Марка Insyde Версия F.24 Дата 19.11.2014 Графические устройства Generic PnP Monitor (1600x900@60Hz) Intel HD Graphics 4000 (HP 1024 МБATI Radeon HD 8670M (HP) Модель Radeon HD 8670M Код устройства 1002-6660 Производитель HP (103C) Частота ГП 300,0 (975,0) МГц Версия драйвера 15.201.1001.0 Тип памяти DDR3 Память 1024 МБ Быстродействие 14,4 ГБ/с CrossFire отключён temp-??????????? Хранение данных 465GB TOSHIBA MQ01ABF050 (SATA) 40 °C Установленные платформы .NET Framework v4.5 Full v4.5 Client v3.5 SP1 v3.0 SP2 v2.0 SP2 Link to comment Share on other sites More sharing options...
Rajamin Posted February 2, 2016 Share Posted February 2, 2016 (edited) Speccy latest V1.29 show error system temperature 120C on H81M-K. Speccy may remove system termperature or just show N/A instead of error value. Manufacturer : ASUSTeK COMPUTER INC;Model : H81M-KVersion Rev : X.0xChipset Vendor : INTELChipset Model : H81SIO : NCT5535D Another image soure: Link: http://i.imgur.com/naNjKbi.jpg?1 Edited February 2, 2016 by Rajamin Link to comment Share on other sites More sharing options...
Moderators Nergal Posted February 2, 2016 Author Moderators Share Posted February 2, 2016 Hi, @Rajamincan you attempt re-uploading your image, it doesn't show. Everybody, the developers appreciate your submissions. I hope they can make things better for you. Just a reminder, be sure you have the latest bios version for your PC as sometimes the bug maybe in the motherboard-to-windows communication and/or the way Speccy reads that data ADVICE FOR USING CCleaner'S REGISTRY INTEGRITY SECTION DON'T JUST CLEAN EVERYTHING THAT'S CHECKED OFF. Do your Registry Cleaning in small bits (at the very least Check-mark by Check-mark) ALWAYS BACKUP THE ENTRY, YOU NEVER KNOW WHAT YOU'LL BREAK IF YOU DON'T. Support at https://support.ccleaner.com/s/?language=en_US Pro users file a PRIORITY SUPPORT via email support@ccleaner.com Link to comment Share on other sites More sharing options...
Rajamin Posted February 2, 2016 Share Posted February 2, 2016 Hi Nergal , I can see the picture. But i have added another image source for you. Link to comment Share on other sites More sharing options...
Moderators Nergal Posted February 2, 2016 Author Moderators Share Posted February 2, 2016 Thanks 2nd picture shows ADVICE FOR USING CCleaner'S REGISTRY INTEGRITY SECTION DON'T JUST CLEAN EVERYTHING THAT'S CHECKED OFF. Do your Registry Cleaning in small bits (at the very least Check-mark by Check-mark) ALWAYS BACKUP THE ENTRY, YOU NEVER KNOW WHAT YOU'LL BREAK IF YOU DON'T. Support at https://support.ccleaner.com/s/?language=en_US Pro users file a PRIORITY SUPPORT via email support@ccleaner.com Link to comment Share on other sites More sharing options...
ArturR Posted March 2, 2016 Share Posted March 2, 2016 Hey,Everything is up-to-date, Windows 7 Ultimate.Here's a screenshot of the "motherboard" section. It displays MOBO temperature as high as 113degrees.https://gyazo.com/bfc9266cf6031c2c72048e78af19972d Link to comment Share on other sites More sharing options...
markrity Posted April 1, 2016 Share Posted April 1, 2016 Manufacturer MSI Model H110I PRO (MS-7995) (U3E1) Version 1.0 Chipset Vendor Intel Chipset Model Skylake Chipset Revision 07 Southbridge Vendor Intel Southbridge Model Skylake PCH Southbridge Revision 31 System Temperature 111 °C Using Windows 10 Brand American Megatrends Inc. Version 3.20 Date 1/27/2016 Link to comment Share on other sites More sharing options...
bigstu Posted April 28, 2016 Share Posted April 28, 2016 Manufacturer: ASRock Model: A88M-G/3.1 (mATX, AMD Socket FM2+) Version: v1.0 Chipset Vendor: AMD Chipset Model: A88X (Bolton-D4) Chipset Revision: N/A BIOS: UEFI 1.30 CPU: A10-7850K Clearly there is an issue with AMD FM2+ motherboards and UEFI BIOS. The OEM programs pick up the correct temperature but Speccy can't. This has been going on over a year so why isn't it fixed yet? Link to comment Share on other sites More sharing options...
Moderators Nergal Posted April 28, 2016 Author Moderators Share Posted April 28, 2016 Clearly there is an issue with AMD FM2+ motherboards and UEFI BIOS. Good catch, and that's why I started this thread so patterns (and there are likely to be many separate ones) can be spotted where they would be missed when placed in seperate threads.As far as why it hasn't been fixed, there may be multiple reasons, the least of which could be that it's unfixable and caused by the way that chipset communicates the information to to WMI service which then reports to speccy. ADVICE FOR USING CCleaner'S REGISTRY INTEGRITY SECTION DON'T JUST CLEAN EVERYTHING THAT'S CHECKED OFF. Do your Registry Cleaning in small bits (at the very least Check-mark by Check-mark) ALWAYS BACKUP THE ENTRY, YOU NEVER KNOW WHAT YOU'LL BREAK IF YOU DON'T. Support at https://support.ccleaner.com/s/?language=en_US Pro users file a PRIORITY SUPPORT via email support@ccleaner.com Link to comment Share on other sites More sharing options...
kampua Posted May 1, 2016 Share Posted May 1, 2016 Manufacturer: MSIModel: FM2-A75MA-E35Version: P0Chipset Vendor: AMDChipset Model: A75Chipset Revision: Link to comment Share on other sites More sharing options...
nikrusty Posted May 19, 2016 Share Posted May 19, 2016 BIOS is upto date, just updated it. Windows 10. AMD FX-6300 Windows is not up to date yet. Have yet to install "Cumulative Update for Windows 10 Version 1511 for x64-based Systems (KB3156421)." Manufacturer: MSI Model: 970A-G43 (MS-7693) Version: 3.0Chipset Vendor: AMDChipset Model: RD9x0Chipset Revision: 02 Link to comment Share on other sites More sharing options...
Leo-1314 Posted June 17, 2016 Share Posted June 17, 2016 Wrong CPU temperature - up to 120° C. Windows up to date, BIOS up to date. Manufacturer: AMD Model: Pumori (Socket FT1) Version: Base Board Version Chipset Vendor: AMD Chipset Model: K15 IMC Chipset Revision: 00 Link to comment Share on other sites More sharing options...
Pollowick Posted June 23, 2016 Share Posted June 23, 2016 I have just come here to look for assistance/advice and found this thread. I currently do not have access to te PC, however I will get the details later today and post them. I run Speccy on an older XP machine where I use it to monitor temperatures during processor intensive operations. Recently I was trying to find out why a Win10 machine was running slow and found that under certain conditions there was a high CPU load - Speccy was installed and I could see the temperatures rising however they looked "normal" for the usage. Advice from Dell was to update drivers and move to Win10. Win10 upgrade completed and had to re-install Speccy. CPU temperature are all looking fine - idle around 40/45 c and increase under load. However, motherboard temperature are way out. I have seen several different values reported however they do not vary and stay exactly the same - 77c motherboard when CPU is 30! is one example. Obviously an incorrect value being reported or interpreted. The machine is a Dell Latitude E6430 - further details to follow. Link to comment Share on other sites More sharing options...
Pollowick Posted June 23, 2016 Share Posted June 23, 2016 I have managed to get some snapshots of the appropriate page ... which are saved as .speccy files. I then try to upload them here and for some reason I cannot do so ... I use the Attach Files, Browse to the location, select the image and Open, then when I click <Attach This File> the system responds with: Error You aren't permitted to upload this kind of file when I use the Basic Uploader and Upload Skipped (Error IO) when using the advanced version. Is there a guide on how to upload .speccy files directly? Link to comment Share on other sites More sharing options...
Moderators hazelnut Posted June 23, 2016 Moderators Share Posted June 23, 2016 See here https://www.piriform.com/docs/speccy/using-speccy/publishing-a-speccy-profile-to-the-web Support contact https://support.ccleaner.com/s/contact-form?language=en_US&form=general or support@ccleaner.com Link to comment Share on other sites More sharing options...
Pollowick Posted June 23, 2016 Share Posted June 23, 2016 Thanks hazelnut ... http://speccy.piriform.com/results/MozNMQbkDozBVuUByM61Idi http://speccy.piriform.com/results/KNvyfVXnJbju27HVpKebM2w http://speccy.piriform.com/results/OKjD8vHW1FahzieaCG8czJ4 That seems the best can do! Cannot find a way to display teh image. Link to comment Share on other sites More sharing options...
soybean Posted August 2, 2016 Share Posted August 2, 2016 Manufacturer: HP Model: Pavilion g6 Notebook PCVersion: g6-2210usChipset Vendor: AMDChipset Model: ??Chipset Revision: ?? Speccy appears to be reporting invalid CPU temps. This laptop computer has a dual-core processor. I installed CoreTemp and it reports temps for each core. Speccy seems to be adding the two temps and, therefore, reporting a falsely high temperature. For example, I just started CoreTemp and it reported 39C or 40C degrees for each core while I was running CoreTemp. I closed it and started Speccy; it is reporting 89C for temp for CPU, an extremely high and alarming temperature. The temps it is reporting for motherboard, graphics, and storage are 40C, 38C, and 37C, respectively, so no worries there. Link to comment Share on other sites More sharing options...
Moderators Nergal Posted August 2, 2016 Author Moderators Share Posted August 2, 2016 Chipset Model: ??Chipset Revision: ?? . Does speccy not report these values as well? ADVICE FOR USING CCleaner'S REGISTRY INTEGRITY SECTION DON'T JUST CLEAN EVERYTHING THAT'S CHECKED OFF. Do your Registry Cleaning in small bits (at the very least Check-mark by Check-mark) ALWAYS BACKUP THE ENTRY, YOU NEVER KNOW WHAT YOU'LL BREAK IF YOU DON'T. Support at https://support.ccleaner.com/s/?language=en_US Pro users file a PRIORITY SUPPORT via email support@ccleaner.com Link to comment Share on other sites More sharing options...
Paul Walker Posted August 3, 2016 Share Posted August 3, 2016 Yup it showed the wrong temp in 1151. That was fixed. Now it's showing the wrong temp in Redstone (14393.10). It shows 120-121 degrees. for the mobo. CPU ( 21 ) is fine, and so is storage (17) Mobo is:: ASUS H97M-E - Built by me. Chipset Vendor: Speccy says Intel. Chipset revision: 06 (Haswell is the chipset model) Link to comment Share on other sites More sharing options...
Nerf Herder Posted August 20, 2016 Share Posted August 20, 2016 Hello, Speccy is reporting the wrong temperature for my motherboard (~116 degrees, use to be ~25-30). Only since the windows 10 anniversary update, it was working fine before. BIOS and drivers are all up to date. Manufacturer: ASUSTeK COMPUTER INC. Model: Z97-E (SOCKET 1150) Version: Rev X.0x Chipset Vendor: Intel Chipset Model: Haswell Chipset Revision: 06 Link to comment Share on other sites More sharing options...
hamid3pnn Posted August 28, 2016 Share Posted August 28, 2016 hello please fix wrong motherboard temp with new version Link to comment Share on other sites More sharing options...
Moderators Nergal Posted August 28, 2016 Author Moderators Share Posted August 28, 2016 hello please fix wrong motherboard temp with new version Please provide the information requested. The developers are always working to better this detection and have recently been prodded to look into this thread a little harder ADVICE FOR USING CCleaner'S REGISTRY INTEGRITY SECTION DON'T JUST CLEAN EVERYTHING THAT'S CHECKED OFF. Do your Registry Cleaning in small bits (at the very least Check-mark by Check-mark) ALWAYS BACKUP THE ENTRY, YOU NEVER KNOW WHAT YOU'LL BREAK IF YOU DON'T. Support at https://support.ccleaner.com/s/?language=en_US Pro users file a PRIORITY SUPPORT via email support@ccleaner.com Link to comment Share on other sites More sharing options...
hamid3pnn Posted August 31, 2016 Share Posted August 31, 2016 Please provide the information requested. The developers are always working to better this detection and have recently been prodded to look into this thread a little harder sure , Manufacturer ASUS Model H87M-E Version BIOS 2201 Chipset Vendor INTEL Chipset Model HASWELL Chipset Revision 06 Link to comment Share on other sites More sharing options...
Dave-H Posted September 6, 2016 Share Posted September 6, 2016 Another one to add to this thread. As you can see from the attached image, Speccy is showing very different CPU temperatures to Core Temp. It's a dual CPU Supermicro X7DAL-E motherboard, with X5460 quad core Xeons fitted. On several cores, Speccy is showing much higher temperatures than Core Temp on CPU#0, and much lower temperatures on CPU#1! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now