nodles Posted January 7, 2012 Share Posted January 7, 2012 New version of MSI Afterburner released (2.2.0 beta 10). Here's the release notes & download link: http://forums.guru3d...900&postcount=1 1. Added AMD Tahiti graphics processors family support 2. Added core voltage control for reference design AMD RADEON 7970 graphics cards with CHL8228 voltage regulators 3. MSI On-Screen Display server has been upgraded to version 4.3.0. New version gives you the following improvements: 1. Added new profile settings allowing to limit the framerate independently during gaming and during videocapture. Limiting the framerate during gaming can help to reduce the power consumption as well as it can improve gaming experience due to removing unwanted microstutteing effect caused by framerate fluctuations. Limiting the framerate during videocapture can improve resulting video smoothness 2. Added Vector 3D On-Screen Display rendering mode support for OpenGL applications 3. Added Raster 3D On-Screen Display rendering mode support for multithreaded OpenGL applications (e.g. ID Software's Rage) 4. Added workaround for AMD Direct3D driver issues causing OSD to be invisible in Direct3D8 and Direct3D9 applications when using Raster 3D On-Screen Display rendering mode 5. 4. Now unofficial overclocking can be enabled without typing in the EULA into the configuration file. In this case the EULA is displayed and you're forced to accept it during MSI Afterburner startup 5. Added power user oriented command line switches allowing to extend Overdrive clock limits on AMD graphics cards attached to Windows desktop I'll wait for the final version (2.2.0), before reinstalling Windows I had (final) 2.1.0 installed. Link to comment Share on other sites More sharing options...
nodles Posted February 24, 2012 Author Share Posted February 24, 2012 2.2.0 beta 14 released: http://downloads.guru3d.com/MSI-Afterburner-2.2.0-Beta-14-download-2859.html Link to comment Share on other sites More sharing options...
nodles Posted March 21, 2012 Author Share Posted March 21, 2012 2.2.0 Beta 15: http://downloads.guru3d.com/MSI-Afterburner-2.2.0-Beta-15-download-2884.html Release notes: http://forums.guru3d.com/showthread.php?t=360280#top Link to comment Share on other sites More sharing options...
nodles Posted April 21, 2012 Author Share Posted April 21, 2012 MSI Afterburner 2.2.0 final released. Release Notes Download Link1 Download Link2 Btw. whis thread can be moved to Software. Link to comment Share on other sites More sharing options...
nodles Posted May 16, 2012 Author Share Posted May 16, 2012 MSI Afterburner v2.2.1 Changes list includes: Added reference design AMD RADEON 7850 series graphics cards support Added NVIDIA GeForce GTX 690 series graphic cards support Added big editions of default and legacy skins Updated localizations Please move this to "Software". Thanks! Link to comment Share on other sites More sharing options...
nodles Posted August 17, 2012 Author Share Posted August 17, 2012 MSI Afterburner v2.2.3 Revised I2C access API for NVIDIA 301.xx and newer display drivers Added core, memory and auxiliary PEXVDD voltage control for custom design MSI N680GTX Lightning series graphics cards with CHL8318+uP6262 voltage regulators Added memory and VRM temperature monitoring for custom design MSI N680GTX Lightning series graphics cards with NCT7718W thermal sensors Added core, memory and auxiliary PEXVDD voltage control for custom design MSI N670GTX Power Edition series graphics cards with uP6262 voltage regulators Missed the previous release v2.2.2 MSI Afterburner Version 2.2.2 (2012/6/20) Increased upper allowed power limit for power limit adjustment slider on some extreme editions of NVIDIA GeForce GTX 600 series graphics cards ATIPDLXX.DLL is no longer included in MSI Afterburner distributiv MSI On-Screen Display server has been upgraded to version 4.3.4. New version gives you the following improvements: ○ Fixed framerate calculation for DirectX10/DirectX11 applications, which actively use presentation testing during rendering (e.g. Max Payne 3) Link to comment Share on other sites More sharing options...
nodles Posted September 18, 2012 Author Share Posted September 18, 2012 Please move this to "Software". Thanks! MSI Afterburner v2.2.4 MSI Afterburner Version 2.2.4 (2012/9/18) Added new graphics cards support Change the NVIDIA Kepler series voltage control mode Link to comment Share on other sites More sharing options...
nodles Posted November 26, 2012 Author Share Posted November 26, 2012 Please move this to "Software". Thanks! I've skipped a few, but v2.3.0 just got released. MSI Afterburner Added 9-bit VID support for CHL8318 voltage regulators to bypass 1.6V limit in Extreme versions of MSI Afterburner Fixed rounding error in VID generation for offset voltage control mode for CHL8318 voltage generators Now it is possible to start MSI Afterburner in limited functionality mode on the systems with no supported AMD or NVIDIA graphics card. This allows you to use hardware independent features like high-performance Predator™ video capture module on any PC, even if it is using integrated Intel graphics Added frametime graph to hardware monitoring module. The graph is displaying the maximum frame time on each sampling period and it is useful for detecting microstutters, which are invisible on averaged framerate graph. All documentation is now provided in PDF format Added unified videomemory usage monitoring implementation for Windows 8 Removed obsolete GPU type selection settings for some AMD graphics cards Removed obsolete shader clock monitoring for NVIDIA Kepler graphics cards Improved hardware database format, now custom design MSI graphics cards are calibrated in separate OEM file to minimize the risk of introducing typos in reference design cards definitions when updating the database MSI On-Screen Display server has been upgraded to version 4.4.0. New version gives you the following major improvements in Predator™ video capture module: Improved RTV1 compression algorithm. New compression approach combines DXTC, RLE and uncompressed data saving algorithms and allows you to increase image quality at the cost of decreasing compression ratio, while keeping extremely fast compression performance. Please take a note that the previous RTV1 compression implementation is equal to the lowest possible 25% image quality/compression ratio balance in new implementation Added 64-bit version of RivaTuner Video Codec. Now RTV1 videos are playable and editable in 64-bit applications (e.g. 64-bit Sony Vegas PRO or Adobe Premiere PRO CS6) Huffman tables are no longer omitted by MJPG encoder to improve compatibility with applications using limited MJPG decoders (e.g. Sony Vegas PRO) Now both 32-bit and 64-bit versions of RivaTuner Video Codec can optionally decode MJPG videos. Third party MJPG codec installation is no longer required to play or edit MJPG videos with omitted Huffman tables in some applications with limited MJPG decoding support (e.g. Sony Vegas PRO). MJPG decoder can be enabled in video capture compatibility properties Multisource audio recording. Now it is possible to record audio from two independent audio sources (e.g. game audio and microphone sound) in two independent audio tracks then mix them later in video editing application (e.g. Sony Vegas PRO) or optionally mix multiple tracks in realtime during capture Now it is possible to downmix multichannel audio to stereo in stereo rip and stereo mix modes. Previously available stereo rip mode simply rips front left and right audio channels from multichannel audio stream, whilst new stereo mix mode merges audio from front left, right, center and surround channels WASAPI audio packets with timestamp error are no longer included into output audio stream External VFW codecs support. Now in addition to built-in uncompressed, RTV1 and MJPG encoders it is also possible to encode video using external VFW codecs installed in the system. It is recommended to download, install and use Lagarith Lossless Codec for lossless video capturing or x264vfw codec for the maximum compression ratio, MSI Afterburner was developed to provide the best compatibility with these codecs Video stream synchronization is now based on inserting NULL frames instead of indexing existing frames Frame dropping implementation has been improved to provide compatibility with external VFW codecs using temporal compression and deltaframes Now output video dimensions are always cropped to be multiples of 2 to provide compatibility with external VFW codecs Now framerate is calculated on each frame with sliding 1000ms window approach instead of calculating it once per second Improved rendering pipeline flushing implementation for Direct3D9 applications provides more stable framerate when capturing videos with VSync enabled New dynamic Direct3D rendering pipeline flushing approach can decrease videocapture related performance hit when capturing videos in Direct3D applications with high rendering framerates Added On-Screen Display support for Direct3D 10 applications in Windows 8 Added German localization Updated profiles list Link to comment Share on other sites More sharing options...
Moderators Nergal Posted November 27, 2012 Moderators Share Posted November 27, 2012 moved to software you may[/] need to reset your notifications ADVICE FOR USING CCleaner'S REGISTRY INTEGRITY SECTION DON'T JUST CLEAN EVERYTHING THAT'S CHECKED OFF. Do your Registry Cleaning in small bits (at the very least Check-mark by Check-mark) ALWAYS BACKUP THE ENTRY, YOU NEVER KNOW WHAT YOU'LL BREAK IF YOU DON'T. Support at https://support.ccleaner.com/s/?language=en_US Pro users file a PRIORITY SUPPORT via email support@ccleaner.com Link to comment Share on other sites More sharing options...
nodles Posted November 27, 2012 Author Share Posted November 27, 2012 Thanks! Anyone else using MSI Afterburner? Great software to overclock GPU & control GPU fan speed! It's bases on RivaTuner, which is not developed anymore. Link to comment Share on other sites More sharing options...
Moderators mta Posted December 2, 2012 Moderators Share Posted December 2, 2012 sorry nodles, i don't use it. in fact, don't even know any PC that I've seen it on either. the few MSI mobo's and graphics cards i do see, the user hasn't loaded afterburner. Backup now & backup often.It's your digital life - protect it with a backup.Three things are certain; Birth, Death and loss of data. You control the last. Link to comment Share on other sites More sharing options...
nodles Posted December 2, 2012 Author Share Posted December 2, 2012 You don't need MSI hardware to use it. Link to comment Share on other sites More sharing options...
Moderators mta Posted December 2, 2012 Moderators Share Posted December 2, 2012 OK I did not know that. That's how little I've had the need to eek out those extra few electrons. Overclocking never was my thing, if I needed a faster PC, vid card, ram or whatever, I just brought one. But I do understand the 'geek value' in making something perform like it's dearer rival but for the cost of it's poorer cousin. Backup now & backup often.It's your digital life - protect it with a backup.Three things are certain; Birth, Death and loss of data. You control the last. Link to comment Share on other sites More sharing options...
nodles Posted December 5, 2012 Author Share Posted December 5, 2012 You can still use it to control GPU fan speed and monitoring (or underclock GPU). Link to comment Share on other sites More sharing options...
trium Posted December 9, 2012 Share Posted December 9, 2012 perhaps i have an msi board in the future, but not just yet ;-) Versions of CCleaner Cloud; Introduction Ccleaner Cloud; Ccleaner-->System-Requirements; Ccleaner FAQ´s; Ccleaner builds; Scheduling Ccleaner Free Es ist möglich, keine Fehler zu machen und dennoch zu verlieren. Das ist kein Zeichen von Schwäche. Das ist das Leben -> "Picard" Link to comment Share on other sites More sharing options...
nodles Posted December 9, 2012 Author Share Posted December 9, 2012 perhaps i have an msi board in the future, but not just yet ;-) You don't need one to use this software. It's for tweaking any GPU. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now