RAM detection erreor

[Carotte77]

Hello,

 

First post here. Firstly, please excuse me for my english, I'm french, so be cool if I do mistakes.

 

Here is the bug : the RAM is not well recognised.

 

Here are the specs of my installed RAM : 2x2Gb G.Skill Extreme Series RL PC12800 1600Mhz Dual Channel F3-12800CL9D-4GBRL (CAS : CAS : 9-9-9-24-2N)

 

And here is what Speccy says : 4.0 Go Canal-Double DDR3 @ 667 MHz (9-9-9-24)

 

The frequency is not well recognised (I hope Speccy is mistaking, I paid for 1600 MHz !! ^^).

 

EDIT : error with all versions (including betas and last version 1.03.162)

[Lightsttn1]

Hello,

 

First post here. Firstly, please excuse me for my English, I'm french, so be cool if I do mistakes.

 

Here is the bug : the RAM is not well recognized.

 

Here are the specs of my installed RAM : 2x2Gb G.Skill Extreme Series RL PC12800 1600Mhz Dual Channel F3-12800CL9D-4GBRL (CAS : CAS : 9-9-9-24-2N)

 

And here is what Speccy says : 4.0 Go Canal-Double DDR3 @ 667 MHz (9-9-9-24)

 

The frequency is not well recognized (I hope Speccy is mistaking, I paid for 1600 MHz !! ^^).

 

EDIT : error with all versions (including betas and last version 1.03.162)

 

Hi. Lightsttn1 here. I have the same problem with Speccy. It doesn't recognize my RAM correctly. I have 3 GB of DDR2: 2 GB is DDR2-6400 @800 MHz, and the other is: 2x 512 MB total 1 GB DDR2 @500 MHz. The new DDR2-6400 RAM installed is seen as DDR2 PC2-6400 (400 MHz), and the other RAM: 512 MB of DDR2 RAM was supposed to be @500Mhz. Speccy is seeing it as DDR2 PC2-4300 (266 MHz). Their is a definite bug in the Speccy program. My Speccy is version: 1.02.156. My System BIOS "IS" reading the RAM correctly. To Piriform support: Please fix this bug as noted by these 2 messages. Thank You.

[Lightsttn1]

Lightsttn1 here again. I've just installed the new version 1.03.162, and it still doesn't see my system RAM correctly. Please fix Speccy so it will read the system RAM correctly. Thanks Again for your time.

[Carotte77]

I've just installed v1.05.183 64 bits : still the same problem.

 

And it adds a new one : I have 2 graphic cards with Corssfire enabled, but Speccy says Crossfire is disabled. I checked with GPU-Z which says Crossfire is enabled.

[kroozer]

I discovered a minor RAM error in Speccy 1.04.173 and 1.05.183,

 

Reporting:

Total memory slots 4

Used memory slots 2

Free memory slots 2

I have only 2 memory slots, and none are free.