First off, hello lol. I'm new to these forums. Just thought I would register, to post a bug report. So, I have 24GB of DDR4 RAM @2133MHz and speccy seems to not want to display the type. It simply reads as ''24.0GB Dual-Channel Unknown @1063MHz (15-15-15-36)''. Here's a screenshot of the summary:
And a screenshot of all four slots:
As you can see, it lists the RAM as DDR4 in Max Bandwidth whilst looking at the specific slots; but the ‘‘Type’’ is still shown as ‘‘Unknown’’.
The RAM sticks are snugly within their slots. As for placing the RAM sticks into the correct slots, I’m uncertain what the proper orientation is. It currently looks like this:
The PC originally came with 8GB of DDR4; the above listed Micron Tech RAM. It's a prebuilt Dell XPS 8900, ordered off the Dell website. The day it arrived, speccy still claimed it was ''8.0GB Dual-Channel Unknown @1063MHz''. So, it wasn't an issue from adding the extra RAM, as it still choked up from the professionally installed ''stock'' RAM.
With DDR2 and DDR3 RAM, speccy identifies it just fine. The only time it decides to complain, is when I use DDR4.
- How new/old are these "DDR4" memory chips ? How old is your system ? I wouldn't be surprised to see that SPECCY's program code needs to be improved to be able to detect these kind of memory chips.
- Do you have documentation for your motherboard ? Perhaps that will tell you in what slot what kind of memory needs to be inserted.
- How old is your system ? I wouldn't be surprised to see that SPECCY's program code needs to be improved to be able to detect these kind of memory chips.
- Do you have documentation for your motheerboard ? Perhaps that will tell you in what slot what kind of memory needs to be inserted.
As can be seen in the screenshots I provided, the RAM sticks are from 2015.
I purchased my Dell XPS 8900, in April of this year; 2016.
I'm fairly certain that Dell has a digital documentation somewhere, but no. It didn't come with a manual. And no, lol. I think you've misunderstood/skimmed what I typed out. My motherboard supports DDR4 RAM. I explained that I wasn't sure what the proper ''order'' the sticks needed to be in. Quad Channel and Dual Channel performance entirely depends on the orientation of the sticks. With that said, there's most likely documentation of sorts online somewhere, detailing this.
Regardless, my RAM installation isn't the issue here. It's been about a month since I installed the new RAM. Everything runs and functions perfectly. I just recently (today) became extra curious about this, so I decided to create this forum account and post about Speccy's behaviour. But yeah. I was thinking along the same lines -- Speccy may not be coded to recognise DDR4 yet.
Thank you for that. I knew there was some, floating around somewhere. =)
Sadly, it doesn't say anything about the specific RAM stick orientation. I'll need to look up a guide for that; I'm sure a quick google search will be fine.
- @LUE: I do understand that're only wanted to report a bug.
- The last screenshot suggests that that part of the SPECCY programcode does recognize of "what's going on".
Well, yes. It does seem to recognise every aspect of the Chips, other than being able to label it as DDR4. So no, it's not a big issue. I just felt that any bug; small or not, was worth reporting.
