Admiral Ross Posted September 12, 2006 Share Posted September 12, 2006 Hello All! For the past few hours I've been investigating on upgrades for my current system. Is this worth the trouble upgrading it? Here a list of the following components: Western Digital Caviar SE16 WD4000KDRTL 400GB 7200 RPM Serial ATA150 Hard Drive - Retail Intel Pentium 4 630 Prescott 3.0GHz LGA 775 EM64T Processor Model BX80547PG3000F - Retail mushkin 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 533 (PC2 4200) Dual Channel Kit System Memory Model 996519 - Retail This is what I have now Dell XP2/5150c PROCESSOR, 80551, PENTIUM D SMITHFIELD FOR DESKTOPS, 820, SKT-T, MALE DUAL IN-LINE MEMORY MODULE, 256, 533, 32X64, 8, 240, 1RX16 HARD DRIVE, 80G, S2, 7.2K, 8MB, LEAD FREE, WD-UNIC My machines specs are as follows: Intel? Pentium? 4 5XXX and 6XXX processors with Hyper-Threading technology Pentium D 8XXX dual core processors (no Hyper-Threading) Intel Celeron? D processors 16 KB for Pentium 4 5XXX and 6XXX processors and Celeron D processors 2 x 16 KB for Pentium D 8XXX dual core processors 1 MB for Pentium 4 5XXX processors 2 MB for Pentium 4 6XXX processors 2 x 1 MB for Pentium D 8XXX processors 128 KB for Celeron D processors (depending on your computer configuration) pipelined-burst, eight-way set associative, write-back SRAM Currently running via siw.exe Memory Summary Capacity 512 MBytes Location System board or motherboard Maximum Capacity 1024 MBytes Memory Slots 4 Error Correction None Name Physical Memory Array Use System memory Device Locator Slot 1 Manufacturer Infineon (formerly Siemens) Part Number 64T32000HU3.7A Serial Number 03143713 Capacity 256 MBytes Memory Type DDR2 SDRAM Speed DDR2-533 (266 MHz) Data Width 64 bits Voltage SSTL 1.8V Error Correction None Refresh Reduced (.5x)...7.8 ?s Manufacturing Date 2005, Week 50 EPP SPD Support No Device Locator Slot 3 Manufacturer Infineon (formerly Siemens) Part Number 64T32000HU3.7A Serial Number 0302C926 Capacity 256 MBytes Memory Type DDR2 SDRAM Speed DDR2-533 (266 MHz) Data Width 64 bits Voltage SSTL 1.8V Error Correction None Refresh Reduced (.5x)...7.8 ?s Manufacturing Date 2005, Week 51 EPP SPD Support No Sorry for the long post but I wanted to cover all of my bases.. Thanks. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now