Jump to content

ESP : Speccy consume toda la memoria RAM y no encuentra la información


Recommended Posts

Al iniciar el speccy veo un consumo exagerado en memoria RAM , tengo 16gb de RAM y esta es ocupada  totalmente por speccyimage.png.12daf56c223518cd3ced42071a3a0405.png
No puedo obtener la información y el sistema se cae al tener el 99% de la ram ocupada por speccy

 

Translation:

When I start the speccy I see an exaggerated consumption of RAM, I have 16gb of RAM and it is fully occupied by speccy.

I can't get the information and the system crashes with 99% of the ram occupied by speccy

Link to comment
Share on other sites

  • Moderators

Your screenshot seems to show Speccy using just under 9 MB of RAM.

That is only 0.05% of your 16 GB.

Can you give more details of your problem?

Su captura de pantalla parece mostrar a Speccy usando poco menos de 9 MB de RAM.

Eso es solo el 0.05% de sus 16 GB.

¿Puede darnos más detalles sobre su problema?

*** Out of Beer Error ->->-> Recovering Memory ***

Worried about 'Tracking Files'? Worried about why some files come back after cleaning? See this link:
https://community.ccleaner.com/topic/52668-tracking-files/?tab=comments#comment-300043

 

Link to comment
Share on other sites

@nukecad

No, the amount of memory occupied/used by SPECCY is NOT ~ 9 MB but it's ~ 9 GB !!!! That's about 55% of the 16 GB of memory. The problem here is the difference between how people in England (& the US) and continental Europe write down their numbers. In England + the US people write down "8,954.4" whereas people in continental Europe write "8.954,4". In the US & England people use a "Decimal Point" but in continental Europe people use a "Decimal Comma". And Spain (at I assume "DeathSong" lives in Spain) is in continental Europe.

 

@DeathSong

I assume that 12% is the amount of CPU that is being used ? The high amount of memory used in combination with high CPU means that there is conflict between SPECCY and some other program. Open Windows' Resource Monitor (Memory tab) and the run SPECCY to see how the different parts of the memory behave. Or run the program RAMMAP to see if there is any odd behaviour going on. (Did you turn off the pagefile ?).

System setup: http://speccy.piriform.com/results/gcNzIPEjEb0B2khOOBVCHPc

 

A discussion always stimulates the braincells !!!

Link to comment
Share on other sites

@DeathSong

Download & run Tweaking's windows Repair . It can fix A LOT OF problems in Windows.

Download & install the program. Disable your antivirus program and run the program. Follow the instructions provided by the program.

System setup: http://speccy.piriform.com/results/gcNzIPEjEb0B2khOOBVCHPc

 

A discussion always stimulates the braincells !!!

Link to comment
Share on other sites

  • Moderators

Note while the above looks spammy it's not; tweaking's and willy are known entities on this board

Jfyi 😝

 

ADVICE FOR USING CCleaner'S REGISTRY INTEGRITY SECTION

DON'T JUST CLEAN EVERYTHING THAT'S CHECKED OFF.

Do your Registry Cleaning in small bits (at the very least Check-mark by Check-mark)

ALWAYS BACKUP THE ENTRY, YOU NEVER KNOW WHAT YOU'LL BREAK IF YOU DON'T.

CCLEANER, RECUVA, DEFRAGGLER AND SPECCY DOCUMENTATION CAN BE FOUND AT  https://support.piriform.com/hc/en-us and  https://www.ccleaner.com/docs

Pro users file a PRIORITY SUPPORT request at https://support.piriform.com/hc/en-us/requests/new

link to WINAPP2.INI explanation

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.