winactive Posted September 18, 2015 Share Posted September 18, 2015 Here is an excerpt from the Speccy .txt snapshot file; Storage Hard drives WDC WD5000LPVX-22V0TT0 Manufacturer Western Digital Heads 16 Cylinders 60,801 Tracks 15,504,255 Sectors 976,768,065 SATA type SATA-III 6.0Gb/s Device type Fixed ATA Standard ACS2 Serial Number WD-WX61AA4PJFK7 Firmware Version Number 01.01A01 LBA Size 48-bit LBA Power On Count 589 times Power On Time 28.6 days Speed 5400 RPM Features S.M.A.R.T., APM, NCQ Max. Transfer Mode SATA III 6.0Gb/s Used Transfer Mode SATA III 6.0Gb/s Interface SATA Capacity 465 GB Real size 500,107,862,016 bytes RAID Type None S.M.A.R.T Status Good Temperature 34 °C Temperature Range OK (less than 50 °C) S.M.A.R.T attributes 01 Attribute name Read Error Rate Real value 0 Current 200 Worst 200 Threshold 51 Raw Value 0000000000 Status Good 03 Attribute name Spin-Up Time Real value 1566 ms Current 148 Worst 145 Threshold 21 Raw Value 000000061E Status Good 04 Attribute name Start/Stop Count Real value 2,305 Current 98 Worst 98 Threshold 0 Raw Value 0000000901 Status Good 05 Attribute name Reallocated Sectors Count Real value 0 Current 200 Worst 200 Threshold 140 Raw Value 0000000000 Status Good 07 Attribute name Seek Error Rate Real value 0 Current 200 Worst 200 Threshold 0 Raw Value 0000000000 Status Good 09 Attribute name Power-On Hours (POH) Real value 28d 14h Current 100 Worst 100 Threshold 0 Raw Value 00000002AE Status Good 0A Attribute name Spin Retry Count Real value 0 Current 100 Worst 100 Threshold 0 Raw Value 0000000000 Status Good 0B Attribute name Recalibration Retries Real value 0 Current 100 Worst 100 Threshold 0 Raw Value 0000000000 Status Good 0C Attribute name Device Power Cycle Count Real value 589 Current 100 Worst 100 Threshold 0 Raw Value 000000024D Status Good BF Attribute name G-sense error rate Real value 16 Current 84 Worst 84 Threshold 0 Raw Value 0000000010 Status Good C0 Attribute name Power-off Retract Count Real value 11 Current 200 Worst 200 Threshold 0 Raw Value 000000000B Status Good C1 Attribute name Load/Unload Cycle Count Real value 8,350 Current 198 Worst 198 Threshold 0 Raw Value 000000209E Status Good C2 Attribute name Temperature Real value 33 °C Current 110 Worst 100 Threshold 0 Raw Value 0000000021 Status Good C4 Attribute name Reallocation Event Count Real value 0 Current 200 Worst 200 Threshold 0 Raw Value 0000000000 Status Good C5 Attribute name Current Pending Sector Count Real value 0 Current 200 Worst 200 Threshold 0 Raw Value 0000000000 Status Good C6 Attribute name Uncorrectable Sector Count Real value 0 Current 100 Worst 253 Threshold 0 Raw Value 0000000000 Status Good C7 Attribute name UltraDMA CRC Error Count Real value 0 Current 200 Worst 200 Threshold 0 Raw Value 0000000000 Status Good C8 Attribute name Write Error Rate / Multi-Zone Error Rate Real value 0 Current 100 Worst 253 Threshold 0 Raw Value 0000000000 Status Good Partition 0 Partition ID Disk #0, Partition #0 File System NTFS Volume Serial Number 74CFAA9B Size 599 MB Used Space 261 MB (43%) Free Space 338 MB (57%) Partition 1 Partition ID Disk #0, Partition #1 Size 300 MB Partition 2 Partition ID Disk #0, Partition #2 Disk Letter C: File System NTFS Volume Serial Number 9C5C7CD8 Size 449 GB Used Space 77 GB (17%) Free Space 371 GB (83%) Partition 3 Partition ID Disk #0, Partition #3 File System NTFS Volume Serial Number F0D24883 Size 15.4 GB Used Space 13.8 GB (89%) Free Space 1.57 GB (11%) Seagate Expansion USB Device Heads 16 Cylinders 121,601 Tracks 31,008,255 Sectors 1,953,520,065 SATA type SATA-III 6.0Gb/s Device type Fixed ATA Standard ACS2 Serial Number WD-WX61AA4PJFK7 Firmware Version Number 01.01A01 LBA Size 48-bit LBA Power On Count 589 times Power On Time 28.6 days Speed 5400 RPM Features S.M.A.R.T., APM, NCQ Max. Transfer Mode SATA III 6.0Gb/s Used Transfer Mode SATA III 6.0Gb/s Interface USB (SATA) Capacity 931 GB Real size 1,000,204,885,504 bytes RAID Type None S.M.A.R.T Status Good Temperature 34 °C Temperature Range OK (less than 50 °C) S.M.A.R.T attributes 01 Attribute name Read Error Rate Real value 0 Current 200 Worst 200 Threshold 51 Raw Value 0000000000 Status Good 03 Attribute name Spin-Up Time Real value 1566 ms Current 148 Worst 145 Threshold 21 Raw Value 000000061E Status Good 04 Attribute name Start/Stop Count Real value 2,305 Current 98 Worst 98 Threshold 0 Raw Value 0000000901 Status Good 05 Attribute name Reallocated Sectors Count Real value 0 Current 200 Worst 200 Threshold 140 Raw Value 0000000000 Status Good 07 Attribute name Seek Error Rate Real value 0 Current 200 Worst 200 Threshold 0 Raw Value 0000000000 Status Good 09 Attribute name Power-On Hours (POH) Real value 28d 14h Current 100 Worst 100 Threshold 0 Raw Value 00000002AE Status Good 0A Attribute name Spin Retry Count Real value 0 Current 100 Worst 100 Threshold 0 Raw Value 0000000000 Status Good 0B Attribute name Recalibration Retries Real value 0 Current 100 Worst 100 Threshold 0 Raw Value 0000000000 Status Good 0C Attribute name Device Power Cycle Count Real value 589 Current 100 Worst 100 Threshold 0 Raw Value 000000024D Status Good BF Attribute name G-sense error rate Real value 16 Current 84 Worst 84 Threshold 0 Raw Value 0000000010 Status Good C0 Attribute name Power-off Retract Count Real value 11 Current 200 Worst 200 Threshold 0 Raw Value 000000000B Status Good C1 Attribute name Load/Unload Cycle Count Real value 8,350 Current 198 Worst 198 Threshold 0 Raw Value 000000209E Status Good C2 Attribute name Temperature Real value 33 °C Current 110 Worst 100 Threshold 0 Raw Value 0000000021 Status Good C4 Attribute name Reallocation Event Count Real value 0 Current 200 Worst 200 Threshold 0 Raw Value 0000000000 Status Good C5 Attribute name Current Pending Sector Count Real value 0 Current 200 Worst 200 Threshold 0 Raw Value 0000000000 Status Good C6 Attribute name Uncorrectable Sector Count Real value 0 Current 100 Worst 253 Threshold 0 Raw Value 0000000000 Status Good C7 Attribute name UltraDMA CRC Error Count Real value 0 Current 200 Worst 200 Threshold 0 Raw Value 0000000000 Status Good C8 Attribute name Write Error Rate / Multi-Zone Error Rate Real value 0 Current 100 Worst 253 Threshold 0 Raw Value 0000000000 Status Good Partition 0 Partition ID Disk #1, Partition #0 Disk Letter E: File System NTFS Volume Serial Number E280E832 Size 931 GB Used Space 493 GB (53%) Free Space 437 GB (47%) This also occurs when connecting another USB drive of a different make, the values from the HDD SMART are reported for the External HDD. I have highlighted the start of the data for each drive. The partition sizes and structure is interpreted per drive but HW IDs and SMART table data is just duplicated. I have tried the portable builds and the result is the same on 32-bit and 64-bit versions of Speccy. Link to comment Share on other sites More sharing options...
spokey Posted December 8, 2015 Share Posted December 8, 2015 I too am seeing the same error speccy 1.29.714 Computer: HP envy notebook HD 1 T Hybrid Windows 8.1 Pro x64 attached 2 USB external drives I won't repeat all the info winactive did unless someone wants it, but I see the same problem as the area he highlighted. The two external drives show the same info as the internal drive. One other thing I see is an entry that only exists for one of the external drives. The drive is a Hitachi Model - HUA722020ALA330There is this entry: Model Capacity For This Specific Drive 200GB which is not correct. This is a 2T drive But this entry is correct: Real size 2,000,398,934,016 bytes Link to comment Share on other sites More sharing options...
winactive Posted December 10, 2015 Author Share Posted December 10, 2015 Thanks for fixing the Windows 10 issue - however, I can confirm this bug is still present. Clean install, not an upgrade. Link to comment Share on other sites More sharing options...
Rigelkent Posted December 13, 2015 Share Posted December 13, 2015 Hi, I have exactly the same problem. Defraggler and Speccy have a bug and display the same information to both internal and external drives. Link to comment Share on other sites More sharing options...
spokey Posted December 13, 2015 Share Posted December 13, 2015 Just checked another machine. It's external drive is connected via eSATA and the information looks right. I didn't acutally verify the info but it is different than the internal 'C' drive. I will shut this down (it's not here at this computer) when I go to that machine, reconnect the drive as a USB3 and see what is reported. Also the other two internal drives seem to be reporting correct information. Internally this machine has two 1G Western drives and one 1/2 G Intel SDHD in addition to the external 4G Hitachii. 2015-12-14 - correction I was wrong. The external drive showing correct information is connected via USB. USB3. That external enclosure is a newer one made by the same company as the other (Vantec). I will next try eSATA and also connect to a USB2 port with a USB2 cable. Link to comment Share on other sites More sharing options...
winactive Posted January 9, 2016 Author Share Posted January 9, 2016 I have now connected a Seagate Expansion Portable 1TB via USB (doesn't matter if USB 2.0/3.0). The SMART info is correct for the Seagate external drive, but the WD MyPassport Ultra still has the duplicate data. I suspect this may well be a firmware issue on drives or how Speccy interrogates them. Link to comment Share on other sites More sharing options...
mdk Posted January 16, 2016 Share Posted January 16, 2016 I am seeing the same thing with the latest Speccy (1.29). My primary disk-drive is a 6Gb/second SSD. See below. My motherboard is an MSI, with built-in RAID support. My secondary disk-drive is a 'RAID-1' pair of Seagate 500GB drives. The volume-serial-number for the RAID set is showing the same as the SSD disk, and the SMART data is for the OCZ. ---- Storage~~Hard drives~~~~OCZ-VERT OCZ-VERTEX3 SCSI Disk Device~~~~Intel Raid 1 Volume SCSI Disk Device ~~~~~Manufacturer~Intel~~~~~Heads~16~~~~~Cylinders~60,800~~~~~Tracks~15,504,000~~~~~Sectors~976,752,000~~~~~SATA type~SATA-III 6.0Gb/s~~~~~Device type~Fixed~~~~~ATA Standard~ATA8-ACS~~~~~Serial Number~OCZ-7GZMV3JV4OKLG4JP~~~~~Firmware Version Number~2.22~~~~~LBA Size~48-bit LBA~~~~~Power On Count~24 times~~~~~Power On Time~1.0 days~~~~~Speed~Not used (SSD Drive)~~~~~Features~S.M.A.R.T., APM, NCQ, TRIM, SSD~~~~~Max. Transfer Mode~SATA III 6.0Gb/s~~~~~Used Transfer Mode~SATA III 6.0Gb/s~~~~~Interface~SATA~~~~~Capacity~465 GB~~~~~Real size~500,104,691,712 bytes~~~~~RAID Type~None~~~~~~S.M.A.R.T~~~~~~~Status~Good~~~~~~~Temperature~30 °C~~~~~~~Temperature Range~OK (less than 50 °C)~~~~~~~~S.M.A.R.T attributes~~~~~~Partition 0~~~~~~~Partition ID~Disk #1, Partition #0~~~~~~~Disk Letter~E:~~~~~~~File System~NTFS~~~~~~~Volume Serial Number~7A4BA287~~~~~~~Size~465 GB~~~~~~~Used Space~130 GB (28%)~~~~~~~Free Space~335 GB (72%) END Link to comment Share on other sites More sharing options...
Serzh Posted February 3, 2016 Share Posted February 3, 2016 I confirm, that USB drives show information from first internal drive Link to comment Share on other sites More sharing options...
Serzh Posted February 3, 2016 Share Posted February 3, 2016 Also Speccy doesn't show physical drives from Storage Spaces, only shows logical drives from it and SMART attributes from first internal non-Storage Space drive. Link to comment Share on other sites More sharing options...
tkavan Posted February 20, 2016 Share Posted February 20, 2016 I confirm, that USB drives show information from first internal drive Me too... From Speccy Professional Edition: Storage Hard drives WDC WD10EZEX-21M2NA0 Manufacturer Western Digital Heads 16 Cylinders 121,601 Tracks 31,008,255 Sectors 1,953,520,065 SATA type SATA-III 6.0Gb/s Device type Fixed ATA Standard ACS2 Serial Number WCC3F3PLJTS1 Firmware Version Number 01.01A01 LBA Size 48-bit LBA Power On Count 249 times Power On Time 35.7 days Speed 7200 RPM Features S.M.A.R.T., NCQ Max. Transfer Mode SATA III 6.0Gb/s Used Transfer Mode SATA III 6.0Gb/s Interface SATA Capacity 931 GB Real size 1,000,204,886,016 bytes RAID Type None PHD 3.0 Silicon-Power USB Device Heads 16 Cylinders 121,601 Tracks 31,008,255 Sectors 1,953,520,065 SATA type SATA-III 6.0Gb/s Device type Fixed ATA Standard ACS2 Serial Number WCC3F3PLJTS1 Firmware Version Number 01.01A01 LBA Size 48-bit LBA Power On Count 249 times Power On Time 35.7 days Speed 7200 RPM Features S.M.A.R.T., NCQ Max. Transfer Mode SATA III 6.0Gb/s Used Transfer Mode SATA III 6.0Gb/s Interface USB (SATA) Capacity 931 GB Real size 1,000,204,886,016 bytes RAID Type None Link to comment Share on other sites More sharing options...
chrisr78 Posted April 4, 2016 Share Posted April 4, 2016 I've just joined this forum in order to report this same bug! I see this SMART data error on several machines where an external HDD is attached via a USB adaptor. The data reported for the external hard drive is identical to that for the internal hard drive. I'm a little disappointed to note that no one from Piriform appears to have responded to this bug report so far, after six months. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now