Jump to content
CCleaner Community Forums
Sign in to follow this  

Question regarding my SSD in Speccy

Recommended Posts

Hi, I've been installing Speccy in my computer and I love it as I can monitor my temp and all, but something is bothering me. Here's a copypaste of my SSD from Speccy:


    Manufacturer    Kingston
    Product Family    SSDNow
    Form Factor    2.5-inch
    Heads    16
    Cylinders    14 593
    Tracks    3 721 215
    Sectors    234 436 545
    SATA type    SATA-III 6.0Gb/s
    Device type    Fixed
    ATA Standard    ATA8-ACS
    Serial Number    xxxxxxxxxxxxxxxxxxxx
    LBA Size    48-bit LBA
    Power On Count    35 times
    Power On Time    2,9 days
    Speed    Not used (SSD Drive)
    Features    S.M.A.R.T., APM, NCQ, TRIM, SSD
    Max. Transfer Mode    SATA III 6.0Gb/s
    Used Transfer Mode    SATA III 6.0Gb/s
    Interface    SATA-2
    Capacity    111 GB
    Real size    120 034 123 776 bytes
    RAID Type    None


Speccy says "Speed = Not used (SSD Drive)" but my bios is clearly using this drive as an SSD.

Interface: SATA-2 is also itching me as I'm using a SATA3 cable along a SATA3 board (Z97).


I was on a phenom X4 955 up to a few days ago with this SSD using SATA2 cables on a SATA2 mobo for a few days and it was booting up much faster than it is doing now on a i5-4690k so I'm wondering is I'm missing something here. Any help is appreciated!

Share this post

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Create New...