Jump to content
CCleaner Community Forums

Speccy no longer shows MB temp


Recommended Posts

When I first installed Speccy, it gave me temps for my CPU, MB and hard drive. I ran it again after not using the system for a while and now it does not show the MB temp. It also never reflected the graphic card temp, is this normal? When I launch the program, windows always asks if I want to permit the program to make changes to my system? Is this normal?

 

Operating System

MS Windows 7 Home Premium 64-bit SP1

CPU

Intel Core i7 860 @ 2.80GHz 115 °F

Lynnfield 45nm Technology

RAM

4.00 GB Dual-Channel DDR3 @ 531MHz (7-7-7-20)

Motherboard

Apple Inc. Mac-F2268DAE (U2E1)

Graphics

Color LCD (2560x1440@59Hz)

ATI Radeon HD 4850 (Apple Computer)

Hard Drives

977GB Seagate ST31000528ASQ ATA Device (SATA) 117 °F

1953GB Western Digital WD My Book 111D IEEE 1394 SBP2 Device (IEEE1394)

Optical Drives

OPTIARC DVD RW AD-5680H ATA Device

Audio

Cirrus Logic CS4206A (AB 81)

Link to post
Share on other sites
  • Moderators

Yes when it asks

windows always asks if I want to permit the program to make changes to my system

I believe what you are referring to is UAC. UAC approval (clicking yes) is nessecary for Speccy to work

 

 

ADVICE FOR USING CCleaner'S REGISTRY INTEGRITY SECTION

DON'T JUST CLEAN EVERYTHING THAT'S CHECKED OFF.

Do your Registry Cleaning in small bits (at the very least Check-mark by Check-mark)

ALWAYS BACKUP THE ENTRY, YOU NEVER KNOW WHAT YOU'LL BREAK IF YOU DON'T.

CCLEANER, RECUVA, DEFRAGGLER AND SPECCY DOCUMENTATION CAN BE FOUND AT  https://support.piriform.com/hc/en-us and  https://www.ccleaner.com/docs

Pro users file a PRIORITY SUPPORT request at https://support.piriform.com/hc/en-us/requests/new

link to WINAPP2.INI explanation

Link to post
Share on other sites
  • Moderators

it's not it's a reply to the last sentence/question. I can't answer why it showed before and not after. Have you updated your BIOS since the first install? Are you running any new (or updated) system wide security software? As far as gfx temp are you certain your card broadcasts this information?

 

 

Also just noticed that your motherboard is a Apple MAC are you running dualboot?

 

ADVICE FOR USING CCleaner'S REGISTRY INTEGRITY SECTION

DON'T JUST CLEAN EVERYTHING THAT'S CHECKED OFF.

Do your Registry Cleaning in small bits (at the very least Check-mark by Check-mark)

ALWAYS BACKUP THE ENTRY, YOU NEVER KNOW WHAT YOU'LL BREAK IF YOU DON'T.

CCLEANER, RECUVA, DEFRAGGLER AND SPECCY DOCUMENTATION CAN BE FOUND AT  https://support.piriform.com/hc/en-us and  https://www.ccleaner.com/docs

Pro users file a PRIORITY SUPPORT request at https://support.piriform.com/hc/en-us/requests/new

link to WINAPP2.INI explanation

Link to post
Share on other sites
  • 2 weeks later...

Thanks for the clarification. No I have not added any additional software. Yes, my SSD supports SMART

 

Manufacturer SAMSUNG

Heads 16

Cylinders 16383

SATA type SATA-II 3.0Gb/s

Device type Fixed

ATA Standard ATA8-ACS

LBA Size 48-bit LBA

Power On Count 43 times

Power On Time 12.6 days

Speed, Expressed in Revolutions Per Minute (rpm) Not used (SSD Drive)

Features S.M.A.R.T., NCQ, TRIM, SSD

Transfer Mode SATA III

Interface SATA-SSD

Capacity 125GB

Real size 128,035,676,160 bytes

RAID Type None

S.M.A.R.T

05 Reallocated Sectors Count 100 (100 worst) Data 0000000000

09 Power-On Hours (POH) 099 (099) Data 000000012E

0C Device Power Cycle Count 099 (099) Data 000000002B

B1 099 (099) Data 0000000007

B3 100 (100) Data 0000000000

B5 100 (100) Data 0000000000

B6 100 (100) Data 0000000000

B7 SATA Downshift Error Count 100 (100) Data 0000000000

BB Reported Uncorrectable Errors 100 (100) Data 0000000000

BE Temperature Difference from 100 052 (046) Data 0000000030

C3 Hardware ECC Recovered 200 (200) Data 0000000000

C7 UltraDMA CRC Error Count 253 (253) Data 0000000000

EB 099 (099) Data 0000000022

F1 Total LBAs Written 099 (099) Data 003E39DB11

Status Good

 

I'm not sure if the graphics cards supports this, its a ATI Radeon HD 4850. I am more concerned however on getting a reading on my SSD.

 

Thanks

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...