Jump to content

atu 6950 and up


fpresiado

Recommended Posts

hello all i used to have a galaxy 250 graphic card and used to show me the temps but now ever since i have upgraded to the 6950 does not show me what my graphic temp is. also does not support the 6970 and the 6990. i always have the latest drivers and i am guessing this is why speccy has not supported the 6950 and up series is because of the constant driver update but if i am wrong when will these cards will be supported?

Link to comment
Share on other sites

  • Moderators

Please don't double post, I've removed your second post.

 

I'm not sure why this is occuring (why it doesn't see the card), the developers read every thread so they may ask you to provide more information (such as attaching a speccy report or sending them your Speccy log via Private message.

 

ADVICE FOR USING CCleaner'S REGISTRY INTEGRITY SECTION

DON'T JUST CLEAN EVERYTHING THAT'S CHECKED OFF.

Do your Registry Cleaning in small bits (at the very least Check-mark by Check-mark)

ALWAYS BACKUP THE ENTRY, YOU NEVER KNOW WHAT YOU'LL BREAK IF YOU DON'T.

CCLEANER, RECUVA, DEFRAGGLER AND SPECCY DOCUMENTATION CAN BE FOUND AT  https://support.piriform.com/hc/en-us and  https://www.ccleaner.com/docs

Pro users file a PRIORITY SUPPORT request at https://support.piriform.com/hc/en-us/requests/new

link to WINAPP2.INI explanation

Link to comment
Share on other sites

the developers read every thread so they may ask you to provide more information (such as attaching a speccy report or sending them your Speccy log via Private message.

 

**********************************************************************

 

I also have a ATI Graphics Card 5570 Radeon HD 5570 that doesn't offer the temp on the Speccy program. See atch.

Mudd

Link to comment
Share on other sites

I'm sure Speccy will eventually support your graphics card it just a question of time.

As for "the developers read every thread" I don't believe it, I rarely see them post or engage in discussion.

I have a small problem with Speccy too, but somehow I doubt it will be fixed in the next version. :rolleyes:

 

Richard S.

Link to comment
Share on other sites

I'm sure Speccy will eventually support your graphics card it just a question of time.

As for "the developers read every thread" I don't believe it, I rarely see them post or engage in discussion.

I have a small problem with Speccy too, but somehow I doubt it will be fixed in the next version. :rolleyes:

 

Richard S.

 

Thanks Richard. I have found a way to see the temp by going into the guts of the Video Card. Running about 47C which is O.K. as far as I know. Just thought I would post that Speccy was missing it.

Mudd

Link to comment
Share on other sites

Please PM me your specsy and we will have a look at this :)

 

Sir: Please excuse my ignorance but I don't know how to PM a person. Your post "Please PM me your .speecy" throws me. An earlier post show the readings I have.

 

Again please realize I'm just an amatuer. I'll be glad to do what needs to be if I can get a little more instructions as to what to do.

Mudd

Link to comment
Share on other sites

  • Moderators

Hi mudd Press the Envelope under MrRon's name to send a P(rivate)M(essage)

I believe he would like you to post the outputted Speccy report from the file menu to the PM (many people would rather it be sent via PM as it contains possibly private information)

 

Redhawk, I hope the fact that MrRon commented shows you that they do read it all; though, yes, they rarely comment more than "we'll look into it" or "please send me your logs" if at all, that's what use members and moderators are for . . . mostly.

 

ADVICE FOR USING CCleaner'S REGISTRY INTEGRITY SECTION

DON'T JUST CLEAN EVERYTHING THAT'S CHECKED OFF.

Do your Registry Cleaning in small bits (at the very least Check-mark by Check-mark)

ALWAYS BACKUP THE ENTRY, YOU NEVER KNOW WHAT YOU'LL BREAK IF YOU DON'T.

CCLEANER, RECUVA, DEFRAGGLER AND SPECCY DOCUMENTATION CAN BE FOUND AT  https://support.piriform.com/hc/en-us and  https://www.ccleaner.com/docs

Pro users file a PRIORITY SUPPORT request at https://support.piriform.com/hc/en-us/requests/new

link to WINAPP2.INI explanation

Link to comment
Share on other sites

With your and other's help I figured out the PM thing. First sent the report that was a "mile or more" long. He wrote again as you can see from the post and asked for a Zipped File. Figured that one out a little faster! It has been sent.

 

Thank to you and the other about for help Just what old F**ts need, help.......

Mudd

Link to comment
Share on other sites

  • Moderators

We're all old in this boat

 

ADVICE FOR USING CCleaner'S REGISTRY INTEGRITY SECTION

DON'T JUST CLEAN EVERYTHING THAT'S CHECKED OFF.

Do your Registry Cleaning in small bits (at the very least Check-mark by Check-mark)

ALWAYS BACKUP THE ENTRY, YOU NEVER KNOW WHAT YOU'LL BREAK IF YOU DON'T.

CCLEANER, RECUVA, DEFRAGGLER AND SPECCY DOCUMENTATION CAN BE FOUND AT  https://support.piriform.com/hc/en-us and  https://www.ccleaner.com/docs

Pro users file a PRIORITY SUPPORT request at https://support.piriform.com/hc/en-us/requests/new

link to WINAPP2.INI explanation

Link to comment
Share on other sites

  • 2 weeks later...
  • Moderators

any news to wither the 6950 and up will be supported? because the new one was release but still no support.

 

The more .speccy reports that the developers get (see your quoted message) the faster this can be looked into.

 

ADVICE FOR USING CCleaner'S REGISTRY INTEGRITY SECTION

DON'T JUST CLEAN EVERYTHING THAT'S CHECKED OFF.

Do your Registry Cleaning in small bits (at the very least Check-mark by Check-mark)

ALWAYS BACKUP THE ENTRY, YOU NEVER KNOW WHAT YOU'LL BREAK IF YOU DON'T.

CCLEANER, RECUVA, DEFRAGGLER AND SPECCY DOCUMENTATION CAN BE FOUND AT  https://support.piriform.com/hc/en-us and  https://www.ccleaner.com/docs

Pro users file a PRIORITY SUPPORT request at https://support.piriform.com/hc/en-us/requests/new

link to WINAPP2.INI explanation

Link to comment
Share on other sites

  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.