Hi,
My i3-4170 displayed as i3-4360. Pls correct that.
Speccy only displays what it gets from WMI Services.
If Speccy shows 4170, it's getting that data from the firmware.
To confirm, start a Command Prompt, type wmic and press Enter, then type cpu get name and hit Enter.
Also have an issue with CPU identification. My CPU is a Pentium G4500 (3.5 GHz Skylake) and Speccy indicates i5-6600K on the summary page - which I copied and pasted below:
Quote "
CPU
Intel Core i5 6600K @ 3.50GHz 26 °C
Skylake 14nm Technology
" Unquote
However on the CPU page it indicates the following:
Quote "
CPU
Intel Core i5 6600K
Cores 2
Threads 2
Name Intel Core i5 6600K
Code Name Skylake
Package Socket 1151 LGA
Technology 14nm
Specification Intel Pentium CPU G4500 @ 3.50GHz
Family 6
Extended Family 6
Model E
Extended Model 5E
Stepping 3
Revision R0
Instructions MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, Intel 64, NX, VMX, AES
Virtualization Supported, Enabled
Hyperthreading Supported, Disabled
Fan Speed 1001 RPM
Stock Core Speed 3500 MHz
Stock Bus Speed 100 MHz
Average Temperature 26 °C
Caches
L1 Data Cache Size 2 x 32 KBytes
L1 Instructions Cache Size 2 x 32 KBytes
L2 Unified Cache Size 2 x 256 KBytes
L3 Unified Cache Size 3072 KBytes
Cores
Core Speed Multiplier Bus Speed Temperature Threads
Core 0 3491.5 MHz x 35.0 99.7 MHz 26 °C APIC ID: 0
Core 1 3491.5 MHz x 35.0 99.7 MHz 25 °C APIC ID: 2
" Unquote
Great program otherwise, reassures my system is running as cool as I designed it to run.