ZZWolf47
-
Posts
8 -
Joined
-
Last visited
Posts posted by ZZWolf47
-
-
CPU, Motherboard, and Memory temp(s) information is now unknown by Speccy since the latest windows update.
Manufacturer: Gigabyte
Model - Gigabyte X99P-SLI-CF (1.0)
Version 1.0
Chipset Vendor - INTEL
North Bridge - Intel Broadwell-E rev 01
South Bridge - Intel X99 rev 05BIOS - American Megatrends Inc. F25b -
Windows did a update and since then, Speccy does not work like it did. It is NOT a BIOS issue
-
It is not a bios issue. windows did a have a update, and after that, the program does not work like it did. Something in the program needs to be updated and a update needs to be worked on asap.
-
It does not show my cpu temps like it did, memory slots and type, motherd stuff like it did...etc... Other Programs do..Speccy does not do that anymore.
Gigabyte GAX99P-SLI
Windows 10 64 Bit -
I have the same issues... the bios still reports the temp and so do other programs.
-
This is true, however it will be great if this program can read more smart codes then it does now. Yes I use more than one program to read smart data but only one that I found that will read S.M.A.R.T. attribute 22 Helium_Level is the one I listed above.
-
I feel that it would be awesome if there were more listed known S.M.A.R.T. attributes. I have a Helium filled hard drive and I feel that attribute would be beneficial to all of us that use helium filled hard drives.
S.M.A.R.T. attribute 22 Helium_Level 0x0023 100 100 025 Pre-fail Always - 100
C:\Program Files\smartmontools for Windows\bin>smartctl −a /dev/sda
smartctl 6.6 2017-11-05 r4594 [x86_64-w64-mingw32-w10-b17134] (sf-6.6-1)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org=== START OF INFORMATION SECTION ===
Model Family: HGST Ultrastar He6
Device Model: HGST HUS726060ALA640
Serial Number: AR31051EJ5LATJ
LU WWN Device Id: 5 000cca 232deb9bd
Firmware Version: AHGNT1EN
User Capacity: 6,001,175,126,016 bytes [6.00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Fri Jan 18 18:01:06 2019 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSEDGeneral SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 57) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: (1053) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
2 Throughput_Performance 0x0005 132 132 054 Pre-fail Offline - 84
3 Spin_Up_Time 0x0007 223 223 024 Pre-fail Always - 475 (Average 419)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 253
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 130 130 020 Pre-fail Offline - 12
9 Power_On_Hours 0x0012 099 099 000 Old_age Always - 11042
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 253
22 Helium_Level 0x0023 100 100 025 Pre-fail Always - 100
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 678
193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 678
194 Temperature_Celsius 0x0002 214 214 000 Old_age Always - 28 (Min/Max 20/38)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0SMART Error Log Version: 1
No Errors LoggedSMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.As you can see, there is already a tool that lists it for me and it would be great if you can do the same.
SPECCY NOT WORKING ALL WINDOWS
in Speccy Bug Reporting
Posted
Is Piriform going to put out a update to fix the cpu temps reading, motherboard readings, memeory slots and what type of memory, etc?....
http://prntscr.com/mxztbx
http://prntscr.com/mxzutx
http://prntscr.com/mxzwmx