Hi,
I just try this program and like to suggest some things to be added in the Summary Page:
1. Add processor speed in CPU
Currently on my system it says
"Intel Pentium 4 531"
Would be better if it shows
"Intel Pentium 4 531 3.0 GHz @ 3.0 GHz"
(showing the stock speed and overclocked speed)
2. Add summary of SPD module in RAM
Currently on my system it says
"3.00 GB Dual-Channel DDR2 @ 266MHz (4-4-4-12)"
Perhaps showing all installed modules?
"Slot1: 1024 MBytes DDR2 PC2-5300 (333 MHz)
Slot2: 1024 MBytes DDR2 PC2-4300 (266 MHz)
Slot3: 1024 MBytes DDR2 PC2-6400 (400 MHz)"
(need info if 3 = 2 + 1 or 3 = 1 + 1 + 1)
3. Add BIOS info in Motherboard
Currently on my system it says
"ASUSTeK Computer INC. P5LD2-VM (LGA 775) 49 °C"
Could be added with BIOS info like this
"ASUSTeK Computer INC. P5LD2-VM (LGA 775) 49 °C
American Megatrends Inc. ver. 0508 date. 03/17/2006"
(sometimes BIOS date could be use to indicate that the pc is quite old and need to be replace,
useful for next year procurement in a company, or as a self reference)
4. Add SMART status for each harddrives
Currently on my system it says
"195GB Seagate ST3200820AS ATA Device (SATA) 46 °C
293GB Maxtor Maxtor 6V300F0 ATA Device (SATA) 46 °C"
You could add SMART status like this
"195GB Seagate ST3200820AS ATA Device (SATA) SMART Status Good 46 °C
293GB Maxtor Maxtor 6V300F0 ATA Device (SATA) SMART Status Good 46 °C"
(i think smart status could tell if the drives need to be backed up and replaced asap, right?)
Ok, that's all for now
I'll wait for the new and improved version of Speccy
