Jump to content
CCleaner Community Forums


  • Content Count

  • Joined

Everything posted by Andavari

  1. Blocking via HOSTS file and/or Firewall causes CCleaner v5.66 (the version I tested) to take a very long time to launch, at least 10 seconds.
  2. Try the Slim build installer from this page: https://www.ccleaner.com/ccleaner/builds
  3. Older versions are located on FileHippo, located on the right-side of the page: https://filehippo.com/download_ccleaner/
  4. They don't have for forum to my knowledge (couldn't find one, although there is a contact page). Also the author is a member on this forum.
  5. I've split these posts into a unique topic since it had nothing to do in the other topic in which it was posted.
  6. I had suggested they create a page, but I don't think they care to have a webpage for XP/Vista users. So my response was to create this at the very end of this pinned help topic (so it's at least documented with information): https://community.ccleaner.com/topic/5739-solution-when-ccleaner-wont-install-or-download-windows/?do=findComment&comment=303883
  7. I'd imagine at some point Automatic Updates will re-gift you (and everyone else that hasn't installed it as of yet) with Edge Chromium rather you want it or not.
  8. If you can write it in English you "may get help faster".
  9. VBA32 is now also detecting all freeware builds: Standard, Slim, Portable. ----------------------- Scan Logs: Jotti Detections Against CCleaner v5.66: * Slim Build (3 Detection's): https://virusscan.jotti.org/en-US/filescanjob/fqylv4rvj9 * Standard Build (3 Detection's): https://virusscan.jotti.org/en-US/filescanjob/2py0yc5fxm * Portable ZIP Build (3 Detection's): https://virusscan.jotti.org/en-US/filescanjob/x9n4nw0xw0 Detection's By: ESET, Ikarus, and VBA32.
  10. The only thing RAM related you'll see in CCleaner is informational, it's located near the very top of it where it gives system specification information such as this: Windows 10 64-bit Intel Core i7-8550U CPU @ 1.80GHz, 16.0GB RAM, Intel UHD Graphics 620
  11. That doesn't look at all like a legit Microsoft installed program that would come with Microsoft Edge.
  12. Hence the reason I posted those links. Most things for Chromium should work, unless they've did something very different.
  13. If Windows doesn't see it as a device you can open normally like how you can open a USB flash drive or USB disk drive the answer is no.
  14. As long as they have the correct file extension renaming them wouldn't make a difference. If they're actually intact it would mean they have proper header information and should play. Like I mentioned in that other old topic you linked to sometimes re-saving a video (not re-encoding/transcoding which causes quality degradation) with the free Avidemux tool I mentioned can if it's just a missing header make the file playable again since it creates a new header so media players (software & hardware) know what the file is and how to play it. Avidemux is no guarantee however, it's just something to use as a last resort, but if it's spitting out errors it may mean your video(s) are damaged.
  15. Recuva doesn't create/save a list, it's only what's displayed within it as it's resident. Therefore if you close Recuva it unfortunately means you'll have to start all over from scratch with it scanning for deleted files.
  16. See if this works, it doesn't require installing anything since it's just a settings change: https://www.lifewire.com/enable-flash-in-chrome-4160696 If that doesn't work see here: https://helpx.adobe.com/flash-player/kb/flash-player-chromium.html
  17. You may be able to restore the lost partition without doing any formatting whatsoever but you'll have to use a 3rd party partitioning tool since what's built into Windows can't accomplish the task to my knowledge. Perhaps Easus Partition Master or MiniTool Partition Wizard can do it, both offer a freeware version but I don't know if the free mode will be able to do that, you may have to buy a license. Both programs are similar and both are good.
  18. You're always better off to replace the disk drive and install Windows fresh onto it, allowing you to keep the original disk drive. Since that's an expense, and to negate it you could use Wipe Free Space -- but make sure you use a recover scan tool (such as Recuva, etc.,) afterwards to make sure sensitive documents, etc., have actually been wiped and aren't recoverable. If you have the Windows install disks I'd personally use DBAN (free/open source) to nuke the data on the disk, and then install Windows fresh onto it. Probably one of the safer more thorough approaches versus trying to wipe data with an OS installed on the disk.
  19. I've asked in your staff area. It's an intriguing question that nobody has asked yet and it's an important question because on Windows XP the Slim build has to be used in order for it to install correctly. They don't have any old builds archived/visible for download on their main download page, or their builds download page. Hopefully they answer in here and provide a link.
  20. If you can't wait. To change things like that in mass in a text document I use Metapad (it's outdated), but I suppose something more modern like Notepad++ could also achieve it. You'd just need to use the Replace feature. Edit: Actually Notepad can do it. The one caveat using it though is it doesn't count/tell you how many items it changed - but it does work!
  21. I wouldn't get any hopes of them fixing it anytime soon, and they obviously would have to know about it by now with a myriad of other issues. They have a bugs list a mile long which to be honest is likely more critical than that one pesky file it creates, which it can subsequently also delete by itself if you use Custom Clean and include the C:\Temp path for cleaning.
  22. If I'm trying to find anything in particular on forums I just use a search engine which more than often will find it versus the forums built-in search. For instance just searching for CCleaner Dup Bug finds the topic about it on DuckDuckGo. Although since CCleaner has the built in Duplicate Finder that will muddy the search.
  23. Also it's only meant to be used on hard disk drives, not with SSDs.
  24. Make sure it's correctly detecting your SSD as an SSD because for some people the detection is incorrect. If correctly detected as an SSD all it would do is run a Trim command if I'm not mistaken. If however it detects it incorrectly as an HDD don't run it, since it will do a traditional defrag.
  25. Many defrag tools aren't of much use at all without at least 20% free space. If you don't have enough free space many will just give up. The only defrag tool that I've ever seen that will defrag very full disks was the now discontinued/unsupported and old JkDefrag (free) which is still available as a PortableApps.com version. Edit - Note: If the disk you're having the issue with is a non-OS disk that doesn't have Windows installed onto it I wouldn't bother with trying to defragment that one pesky file because the disk will quickly get fragmented again, and non-OS hard disks don't usually suffer from performance penalties with some fragmented files especially large sized files that only have a few fragments. If it's for instance an internal, external/portable backup hard drive buying another one with larger capacity (they're not really expensive to get 2tb or more space) to hold your files would be a good solution, and then that drive that doesn't have enough capacity could be repurposed and used for something else. Even if it's an internal drive you could still repurpose it by putting it in an external/portable USB 3.0 hard disk enclosure.
  • Create New...